Your position:Home > Products > Sludge Disposal

Brewery Sludge Dryer

Overview:Brewing Sludge Dryer
Moisture content: 35% to 55%
Application range: can be applied to disposing active sludge disposal, paper sludge disposal, dyeing sludge disposal, coal washing factory, sewage factory, electroplating sludge and chemical pharmaceutical sludge. 

Sales Hotline:

0086-18539990967

Technical introduction

Dryers are mainly applied to beneficiation, building materials, metallurgy and chemistry industry. Rotary drum dryer can adapt to wide range of materials and can dry many kinds of materials. Also, this equipment holds features such as simple and easy operation. Therefore, this dryer has been widely applied. 

Advantages

This dryer has strong adaptability for various materials. It is characterized by simple and easy operation. Therefore, it has been widely applied. 

Working principle

Dryer is a kind of device to dry and heat materials. In the rotary drum body, under the function of screw blades and screw lifting plate, materials will move back and forth and get dried. Tube structure makes the drying time reduced doubly. Thermal consumption will be reduced because of reduction of heat radiation area. Thermal efficiency gets greatly improved because of increase of thermal heat-exchange area. For those materials which can not touch smoke, H series rotary drum dryer provides internal smoke tube and circular smoke tube. There is a radial smoke tube to connect each smoke tube. Thus, the aim of energy saving and high efficiency can be achieved.
  Working principle of sludge dryer: while materials are being dried, one should choose different drying methods for different raw materials. There are some elements should be paid attention to in the drying process, such as moisture content, fuel consumed, air consumed and exhaust air discharged. According to these elements, choose proper dryer, blower, induced draft fan and dust collector. Then, decide combustion area and coal preparation and dust removal method. The selection of dryer is mainly based on material’s quality and moisture content. The operational capacity of dryer is always shown by gasification strength which refers to water gasified in one hour in certain volume of dryer. In normal operation process, in order to avoid over fast air flow speed and material loss, flow speed should be controlled between 2 to 3 meters one hour. Therefore, exhaust air should be calculated. Moisture content and heat content enter gas pipe of dryer drum. In combustion room and mixing room, air is heated to a certain temperature. Accordingly, relative moisture content is reduced to certain level. How much coal is consumed can be figured out by calculating moisture content of steam. 

Technical parameters

Model Drum diameter (mm) Drum length (mm) Drum volume (m3) Rotary speed (r/min) Power (kW) Weight (t)
HG0.6×6 600 6000 1.7 1-8 3 2.9
HG0.8×8 800 8000 4 1-8 4 3.5
HG1×10 1000 10000 7.9 1-8 5.5 6.4
HG1.2×6 1200 6000 6.8 1-6 5.5 6.7
HG1.2×8 1200 8000 9 1-6 5.5 8.5
HG1.2×10 1200 10000 11.3 1-6 7.5 10.7
HG1.2×12 1200 12000 13.6 1-6 7.5 12.5
HG1.5×8 1500 8000 14.1 1-5 11 14.8
HG1.5×10 1500 10000 17.7 1-5 11 16
HG1.5×12 1500 12000 21.2 1-5 15 17.8
HG1.5×15 1500 15000 26.5 1-5 15 19.2
HG1.8×10 1800 10000 25.5 1-5 15 18.1
HG1.8×12 1800 12000 30.6 1-5 18.5 21
HG1.8×15 1800 15000 38.2 1-5 18.5 26.3
HG1.8×18 1800 18000 45.8 1-5 22 31.2
HG2.2×12 2200 12000 45.6 1-4 22 31
HG2.2×15 2200 15000 53.2 1-4 30 36.2
HG2.2×18 2200 18000 68.4 1-4 30 43.3
HG2.2×20 2200 20000 76 1-4 30 48.8
HG2.4×15 2400 15000 67.9 1-4 30 43.7
HG2.4×18 2400 18000 81.4 1-4 37 53
HG2.4×20 2400 20000 90.5 1-4 37 60.5
HG2.4×24 2400 24000 108.6 1-4 45 69.8
HG2.8×18 2800 18000 110.8 1-4 45 71.6
HG2.8×20 2800 20000 123.2 1-3 55 76.8
HG2.8×24 2800 24000 147.8 1-3 55 85
HG2.8×28 2800 28000 172.4 1-3 75 95
HG3×20 3000 20000 141.4 1-3 55 87
HG3×24 3000 24000 169.7 1-3 75 105
HG3×28 3000 28000 198 1-3 90 123
HG3.2×24 3200 24000 193 1-3 90 120
HG3.2×28 3200 28000 225.2 1-3 90 140
Note: there is no prior notice for any change of technical parameters.
 
 
 
 
 

Relevant cases

Order Online

Please pay attention: in order to get timely contact with you, please leave us your complete information such as your contact number, your demand (types of your raw materials, volume, feed size and size of final products); you can also contact us by business link. Really hope we can be your stasified partner.

  • Product:
  • Name:
  • Email:
  • Usage Region:
  • Your Demand:

Matching Device

Sales hotline:0086-18539990967

Address of headquarters:NO. 198, longding industrial zone, high-tech development zone, zhengzhou city, china

Email:vip@tdaxy.com

Zhengzhou Taida Group    Address:NO. 198,longding industrial zone,high-tech development zone,zhengzhou city,china    Sitemap