Your position: Home > Solution > Special Sludge Solution

Leather Industry Sludge Drying Solution

【Production capacity】:1~20t/h        
【Application range】:Used to deal with sludge from tanning and leather plant.
【Applicable material】:Sludge.
【Production introduction】:Leather sludge designed for Taeda Company can effectively reduce running cost and improve drying quality. 

Sales Hotline:

0086-18539990967

Leather industry is an industry which easily produces toxic and hazardous substances, especially Cr and other hazardous substances. Leather is denatured and nonperishable animal skin produced through dehairing, tanning, physical and chemical processing procedures. Leather is composed of natural protein fibers tightly woven in a three-dimensional space. Its surface is with a special particle surface layer featured in natural grain line, gloss and comfortable hand feel. Leather is an indispensable item in modern social life. However, leather industry also produces a large amount of waste water and sludge, which requires deep treatment. Leather sewage treatment produces a large amount of leather sludge. Materials used in leather processing process are mostly additives, lime, sodium sulfide, ammonium salts, vegetable tanning agents, acids, alkalis, proteases, chrome tanning agents, neutralizing agents and etc. Therefore, COD content is large, which seriously affects the environment. According to relevant national regulations, leather sludge needs to be uniformly recycled by qualified companies. For large-scale leather companies, expense caused by leather sludge treatment is a heavy burden. TAEDA recommends leather sludge disposal units use leather sludge dryer to reduce sludge quantity, moisture content and weight so that to control recycling costs.
At present, main treatment method is to remove toxic and harmful ingredients after drying and then use them as resources. TAEDA can design drying plan according to customers’ resource-recycling technology route. In terms of leather sludge drying and quantity reduction, Zonelion Taeda recommends following drying technologies and equipment that have been optimized for many years and have enjoyed great popularity: low temperature belt drying system, low-temperature exhaust heat drum drying system, steam rotary drum drying system, drum sludge drying system and air swept rotary wing drying system. You can click on the "Recommended Process" below for details of above dryer and corresponding technologies. You can also call us directly for quotation and technical support.

Techncial Advantage

* Three-new and three-speciality advantage Three-new advantage: form long-term cooperative relations with universities and scientific research institutions to provide new technologies, new ideas and new directions. Three-specialty advantage: Professional manufacturing and R&D on drying equipment, combination with professional testing institutions and cooperation with professional research and design institutes. We can provide full-process services from project planning, blueprint design to finished product testing, environmental assessment and laboratory construction.
* Three-deep advantage: Production line holds wide application range and can cover each circle. Process details and equipment design are deeply optimized based on multiple working cases, different projects and years’ R&D.
* Three-large and three-low advantage: Taeda holds large standard mechanical manufacture base establishes cooperation with universities and professional institutes. Taeda also have multiple large automatic manufacture processing lines featured in safe running, no explosion-proof risk and no need nitrogen charging operation. During sludge drying process, oxygen and dust content are low and material temperature is low. Moisture of final sludge is low (can be adjusted between 10-40%) and it can meet different processes.
* Three-longitude advantage: It can realize aim of quantity reduction, stabilization, harmlessness and recycling for sludge in leather plant. Final products can be made into fertilizer, fuel, incineration, construction material, biological fuel, landfill and land utilization.

Recommended Process

  • 低温带式干燥系统 Low-temp Belt Drying System
  • 余热低温转筒干燥系统Exhaust Heat Drum Drying
  • 蒸汽回转滚筒干燥系统Steam Rotary Drying System
  • 转筒污泥烘干系统Rotary Drum Drying System
  • 风扫旋翼式干燥系统Air Swept Drying System

Parameter

ModelWorking principleWorking temperatureHeat sourceOccupation areaBrandCapacity
t/h
MEDHot air rotary drum dryer200-750electricity, gas, oil, coal and biomass pelletsMiddleTaeda0.5-50
WWDCirculation hot air mesh belt dryer60-300electricity, gas, heat conduction oil, hot water,exhaust gas, heatLargeZonelion0.05-5
OSCAirflow fluid bed dryer120-750electricity, gas, oil, coal and biomass pelletsVery small中联泰达0.1-10
GDSteam tube rotar drum dryer100-170steam, heat conduction oil, hot waterRelatively largeTaeda0.1-8
WRCLow temperature large air volume rotary drum dryer45-750flue gas, exhaust gas, steam heat exchangingRelatively largeZonelion0.1-20


       Taida Company has three registered trademarks, 中联泰达,ZONELION and TAEDA. We focuses on providing technical supports and services for various Water Companies and Wastewater Treatment Plants. Taeda sludge drying equipment serves multiple fields and various application situations.

Taeda concept: Profession, Efficiency, Innovation and Cohesion

Taeda Culture: Whatever is worth doing at all is worth doing well.

Whatever is worth doing well is worth doing happily.

If you need deep sludge disposal solutions or have already got bid of relevant projects, please contact us for equipment purchase or cooperation discussion.

Call Us

Taeda always put people at first place. It adheres to fair distribution principle and build talent mechanism which combines competition with encouragement. It leads a road to cooperate with universities. Cultivate talents while utilizing talents. It devotes to cultivate all-round talents with good skills and management abilities in order to forge a famous brand and strong enterprise.

Processing Ability

  • 乔家大院之旅Welding Platform
  • 篮球比赛增进友谊Drilling Machine
  • 大型歌唱晚会Edge Milling Machine
  • 员工风采Vertical Lathe
  • Rolling Machine

Relevant cases

Leave Message

If you are interested in our company or products, please kindly leave your contact details and requirements here. Please be assured that your personal information will be used only for business communication. Meanwhile, We will get in touch with you as soon as possible for further discussion.

  • Product:
  • Name:
  • Email:
  • Usage Region:
  • Your Demand:
  • Fill in verification code:

ZONELION® TAEDA®. Address of headquarters:High-tech zone, zhengzhou city, China    Sitemap