Brief introduction:

Bean dregs (soybean curb residue) is a kind of bound water, large oil-based materials, water is not easily to remove

We developed a complete equipment of dehydration drying equipment for beandregs (soybean curb residue)

Beandregs was dehydrated through high pressure

Most of the water is lost in this way just in a minute

Then the beandregs enter into the dryer

Beandregs and the dry fresh hot air moving in the opposite direction under the effect of a special scraping wings (pusher plate) and dry-hot wind

This process is a little long, the temperature is relatively low and the material is running slowly

The dryer is a downstream drying and the outlet temperature is only 40°C

The whole drying process can fully use the thermal energy and the beandregs even heated so the toasted beandregs can have a good color, no burning material and low consumption

Mechanical structure and working principle:

Bean dregs dryer consists of the heat source, feeding machine, rotary drum, discharging machine, induced draft fan, discharge devices, and distribution cabinet

The wet material is put into the dryer after dehydration

The material can disperse evenly and contact fully with the hot air in the dryer through the stirring of the plate which is in the roller

Thus quicken the speed of drying, heat transferring and mass transferring

In the process of drying, the material can be sent out by the star unloading valve which is in the other end of the dryer under the action of the gradient plate and the hot mass

The technological and all equipments' parameter, structure of the production line are being careful analysis and verified by the experiment of drying the bean dregs, we fully take into account the large moisture content, high protein levels, big viscous and adopted a series of unique original technology to solve these problem to ensure a perfect drying results

Main features

High degree of mechanization, large production capacity, and continuous option

Simple and excellent structure, material running smoothly through the cylinder, operating convenience

Less mechanical failure, low maintain charge, and power consumption

Uniformity of drying product is good

Drying production line using a special scattered installations to ensure the dryer's drying effect

Use innovative and unique sealing device, and sophisticated keep-warm system

Reduce the coal consumption of the system effectively

Whole system holds a good performance of sealing

With complete dust removal equipment

No dust spilling

With good operating environment

Whole drying system uses electric centralized control, auto-control of temperature for hot air, high automation and convenient operation

Can join in crushing, mixing, granulating, packing, and other follow-up steps after drying to produce the finished product of beandregs particle feed

Main technical parameters

Relevant cases：

• 

  Sludge Alkaline Stabilization D

  Sludge lime disposal project in Yanjiao sewage plant Yanjiao sewage treatment plant is located in the southwest of Yanjiao Development Zone. The project site is located in Yanjiao sewage plant in the northwest corner of processing, on the west side of...

• 

  Heavy Metal Sludge Dehydration

  Brief introduction of process flow 1.Collection and transportation of sludge: trained personnel to clients collected sludge with iron and space bag packaging, and by the special transport of dangerous goods vehicle transport to the factory dangerous g...